Powering India — Alpine Inside
Electrical steel laminations and precision motor stampings
We have made laminations and stampings from electrical steel at Daman since 1997.
A steel service centre for CRGO and CRNO
We slit on modern lines to the width you specify, and what we hold on every coil matters more than the machine that cut it.
- Mother coil
- Up to 1250 mmSlit to your requirement.
- Burr
- Under 10 microns
- Packing
- Banded, labelled and palletised
What we do
Markets served
CRGO · 0.23–0.35 mm
Transformers
E&I laminations, strip laminations, T&U cores and cut-to-length transformer laminations.
Read moreCRNO · 0.35–0.65 mm
Motors and generators
Stator and rotor stampings on progressive, tungsten carbide tooling, with auto-stack and auto-skew.
Read moreCRNO · 0.50–0.65 mm
Fans and appliances
Pump and fan laminations.
Read moreCRNO, CRCA · 0.50–0.65 mm
Mixer-grinder motors
Universal-motor stampings on tungsten carbide tooling.
Read moreCRNO · 0.35–0.50 mm
EV and automotive
Rotor and stator laminations including skewed stacks and segmental sets.
Read moreCRGO, CRNO · 0.23–0.50 mm
UPS, inverter and solar
Small E&I laminations, T&U cores and reactor laminations.
Read moreCapability at a glance
The figures a sourcing engineer asks for first.
- Power presses
- 10 T to 220 T
- Cut-to-length
- Up to 400 mm width for rectangular strips with holes as required
- Tooling
- Progressive, with auto-stack and auto-skewTungsten carbide or high-speed steel, to suit the part. Designed on your drawings and inspected by us.
- Grades
- CRGO, CRNO, CRCA
- Thicknesses
- 0.20 mm to 1.00 mm
Quality
Markets served
The industries we supply, and what they take from us.
- Transformers
- E&I laminations, strip laminations, T&U cores and cut-to-length transformer laminations.
- Motors, fans and appliances
- Stator and rotor stampings, and pump and fan laminations, against a repeat schedule.
- Mixer-grinder motors
- Universal-motor stampings on tungsten carbide tooling, across the standard design range.
- EV and automotive
- Rotor and stator laminations, including skewed stacks and segmental sets.
- Stepper, DC and specialty motors
- Small-batch and to-drawing stampings where the tooling has to suit one part.
- UPS, inverter and solar
- Small E&I laminations, T&U cores and reactor laminations.
- Switchgear and other
- Stamped and slit components outside the electrical-machine families above.