Skip to content
Alpine Stampings

Service

Tooling, jobwork and how a new part starts

All our products are made to customer drawings. This is how we set that work up and keep it running.

Tooling

Tools are custom-built according to our exacting standards and by long-standing, dedicated toolmakers. Progressive tooling including auto-stack and auto-skew from both tungsten carbide and high-speed steel as per the part requirements.

We maintain tools on the same floor that runs them, so a worn tool can be sharpened in house on our dedicated grinders.

Jobwork

We do stamping and conversion work using your tooling. We apply the same inspection cadence as to our own material.

Starting a new part

  1. Step 01

    Drawing and grade

    Send us the drawing with the grade, thickness, coating and monthly volume. If the grade is not settled, we will tell you what we can supply against the application.

  2. Step 02

    Tool layout and costing

    We prepare the tool layout and quote the part rate alongside the tool cost and its amortisation.

  3. Step 03

    Sample and first-off approval

    We submit samples against the drawing. We agree tolerances per part and confirm them at first-off inspection before releasing the run. Samples are typically ready 60-90 days from receiving drawing and order confirmation.

  4. Step 04

    Running schedule

    Once approved, the part runs against your schedule, with the same first-off, in-process and final inspection on every lot.

Request a quotation

Send us the drawing with the grade, thickness and monthly volume. If the grade is not settled, say so and we will advise against the application.

What the part is, or the drawing number it is on.

Optional. A target helps us tell you quickly whether the part is worth tooling.

Up to 10 MB. .pdf, .dwg, .dxf, .step, .stp, .igs, .iges, .png, .jpg, .jpeg, .zip.

We use what you send here to answer your enquiry and for nothing else. Privacy policyDocument to follow